HDDHacker v1.22 Build 20091022

1815 visiteurs sur le site | S'incrire

Accédez aux coordonnées de l’ensemble des techniciens professionnels recommandés par logic-sunrise 20 derniers dossiers et tutoriaux
Xbox 360 / One
HDDHacker v1.22 Build 20091022

Pour rappel ce logiciel vous permet de préparer vos disque dur WD Scorpio Blue ou Black pour les installer sur votre console xbox 360. C'est donc la bonne solution pour ne pas acheter des disques durs ou le giga coute 1€ ...

 

Avec le hddss.bin de 250Go releasé hier soir, vous pouvez maintenant vous préparer des disques dur de 250Go à moindre cout. Voilà le Nfo d'origine :

 

 

HDDHacker v1.22 Build 20091022

Version History
-----------------


(v1.22)
* Added support for the Western Digital Scorpio Series manufactured 2009

(v1.20)
* Fixed issue with Intel ICH9, ICH10 and VIA chipsets
* Implemented progress bar
* Added support for 80GB and 250GB HDDs (HDDSS.BIN required)

(v1.11)
* Fixed issue, that sometimes caused flashing of Model Name to incorrect offset.

(v1.10)
* Added option to create Partitions 0/2/3 (no more manual hex editing)
* Bug fixed, that caused errors like "LBA size does not match"
* Improved compatibility
* Minor changes

(v1.00)
* Completely new version core
* Two flashing modes, Auto and Manual
* Western Digital Vendor Intro Power Brute for misflashed drives
* Minimized incompatibility problems
* Improved exception handling
* Confirmed HddHacker supports
  - WD Scorpio       Series BEVS/BEAS
  - WD Scorpio Blue  Series BEVS/BEVT
  - WD Scorpio Black Series BEKT/BJKT
  - WD VelociRaptor  Series

(v0.91B)
* Changed restore command to -r "HddHacker -r"
* Changed appearance for more read comfort.
* Changed from .COM to .EXE

(v0.91)
* Added support for the WD BEVS "RST" HDD series and maybe some others.

(v0.90)
* Support for WD 120GB Hard Drives 
* Supports ONLY the WD BEVS 'LAT' version!

(v0.82B)
* Added option to flash the Western Digital back to its original state
* Improved no more manual copying of sectors
* Improved compatibility, should now really work with all BEVS models
* Bug fixed, that caused flashing of incorrect serial number in some rare cases.

(v0.50B)
* Initial Version



How to use
------------

HddHacker supports two flashing modes, Auto and Manual. Typing HddHackr at a DOS prompt
will start auto mode. In auto mode all hard drives will be detected automatically.
In manual mode you can enter all the parameters used for flashing by hand.

The following help screen is displayed if you start HddHacker with a wrong number of
arguments:

HDDHACKR [C|D|F|R] [PORT] [DRIVE POS] [SECTOR FILE] [RESTORE FILE]
                C: Create Partitions 0/2/3
        D: Dump sector 16-22 from XBOX360 HDD to file
                F: Flash Western Digital firmware
                R: Restore Western Digital firmware
             PORT: Port to send command to e.g. 09F0
        DRIVE POS: A0 for Master, B0 for Slave
      SECTOR FILE: Sector dump file e.g. HDDSS.BIN
     RESTORE FILE: Firmware restore file e.g. UNDO.BIN

Example for create, dump, flash and restore:
HDDHACKR C 09F0 A0
HDDHACKR D 09F0 A0 HDDSS.BIN
HDDHACKR F 09F0 A0 HDDSS.BIN UNDO.BIN
HDDHACKR R 09F0 A0 UNDO.BIN



Explanation of the Parameters
-------------------------------

[C|D|F|R]
---------
- this will set the mode of operation, it is recommended to first try to dump the XBOX360
  hard drive data, if the dump will fail, it is highly unlikely that a flash or restore
  will succeed on the Western Digital drive

[PORT]
--------
- the port to which the Hard Drive is connected, a port number should always be entered
  in hexadecimal and have 4 hex digits, valid ports are: 01F0, 09F0, .....
- this option can be used if your PCI adapter card or on board SATA ports are
  not identified by the auto mode

[DRIVE POS]
-------------
- on SATA ports this value is always A0, cause you can only connect a master drive to
  a SATA port, so for SATA you will always type A0 here

[SECTOR FILE]
---------------
- name of the sector 16-22 dump file better known as HDDSS.BIN

[RESTORE FILE]
----------------
- name of the firmware restore file e.g. UNDO.BIN



Using HddHacker in manual mode
--------------------------------

* Dumping the HDDSS.BIN file *
Boot to MS-DOS from a writeable medium (like a floppy or UBS Stick).
Connect an *original* Xbox360 HDD to your SATA controller. Make sure it is the only
SATA device that is connected. Now run 'HDDHACKR D [PORT] A0 HDDSS.BIN' and it will create
the file 'HDDSS.BIN' and save it to the path you've started HddHacker from.

* Creating Partitions 0/2/3 *
In auto-mode the Partition 0/2/3 will be created automaticly to make the drive compatible
with "Xplorer360" and XBOX360 Console. In manual-mode you have to type 'HDDHACKR C [PORT] A0'.

* Flashing your Western Digital drive *
Turn off your PC and connect the Western Digital hard drive. Boot to MS-DOS again.
Type 'HDDHACKR F [PORT] A0 HDDSS.BIN UNDO.BIN' from the same path you have saved the HDDSS.BIN
file to. This will create an 'UNDO.BIN' file that you need if you want to undo the hack
and flash your firmware back to the original state.

* Restoring your WD to original state *
If you don't want to use your modded WD HDD in your XBOX360 anymore and you want to
flash it back to its original size/state, then you can now do so. Boot to MS-DOS and
run 'HDDHACKR R [PORT] A0 UNDO.BIN'. This will use the UNDO.BIN file you created before to
restore the drive to its original state.

* Vendor Intro Power Brute for misflashed drives *
To enter the recovery mode you should boot to MS-DOS, connect your hard drive to PC and type
'HDDHACKR R [PORT] A0 UNDO.BIN'. If the hard drive is misflashed you will be prompted with:
"Western Digital Vendor Intro failed on port [PORT]"
"Do you want to resend the command until the drive responds (Y/N)?"
Press YES, disconnect the hard drive from power and connect it again.
You should get Status 0x50 and the drive will be reflashed.



FAQ
-----

Q. Will this tool allow me to connect a 500GB drive to my x360 ?
A. No. The information on sector 16 is signed and can't be changed. You can
only use the size where you have a valid signature for. In otherwords, if a
bigger HDD comes out, then you can use that signature.

Q. With which HDD's does this work ?
A. As of version 1.22, it now works with all sizes and versions of the
WesternDigital Scorpio Series.

Q. Do I need the same size WD HDD as the size on sector 16 states ?
A. No. You can use bigger HDD's, but you can't use more than the size stated
in sector 16. You can NOT use smaller HDD's than the size on sector 16 states.
For example, you can use a 40GB HDD with a sector 16 from a 20GB HDD, but
not the other way around of course.

Q. Can I use the HDD in my PC again ?
A. Of course. The tool comes with an 'restore' option, that will restore the
original size. For example, you use a 40GB WD HDD, you used HDDSS.BIN from
a valid xbox360 20GB HDD, so the tool will transform your 40GB HDD into a 20GB HDD.
However, you can restore it to 40GB anytime you want with the restore option.

Q. I lost my UNDO.BIN file, can I use it from another drive ?
A. There's no guarantee this will work. It might kill your drive.
Using a UNDO.BIN from a different model (e.g. LAT/RST) will kill your drive for sure.

Q. I have a XBOX360 Core/Arcade version and want to use this hack to buy a cheap HDD.
But how do i connect it ?
A. If you don't have a Premium/Elite, you can make the HDD internal. One great tutorial
that will show you how to do this: http://www.xboxhacker.net/index.php?topic=9542.0

Q. The tool doesn't detect my HDD !
A. First, make sure you are running it from real MS-DOS, not from a DOS box under windows.
If the HddHacker does not autodetect your SATA controller then let us know about it.

Q. The HddHacker says the UNDO.BIN file already exists.
A. If you previously made an UNDO.BIN file, then you should keep that one. There's no
need to create another one. Keep in mind that the UNDO.BIN represents the current state
of the drive.

Q. Could you do this for my Seagate, Maxtor, Samsung or whatever drive too ?
A. Yes, but I don't have plans to do so. It is a lot of work to convert this tool
for usage with other brands and don't think it is worth the trouble.

Q. Where can I donate ?
A. Nowhere. Just enjoy!



Thanks to: Team MODFREAKz for his initial logic board experiments, Loser for his
findings on the sector 16, Antman1 and Rutger1413 for supplying info about the
new 120 gb signature, thethinker_uk for supplying an RST drive, Homer2102 for
supplying a x360 with vulnerable kernel and everybody else at XS/XBH. 



Special thanks to The Specialist for his excellent assembler app!

Modfreakz and Schtrom in October 2009

Mardi 27 Octobre 2009, 18:48 par SoulHeaven
Source : Xbins
27 octobre 2009, 18:51
Approuver ce commentaire (+1)
A nous les HDD 25Go à 50€, par contre j'aurais la coque d'un 120Go . . .
Répondre à ce commentaire
27 octobre 2009, 18:59
Approuver ce commentaire (+1)
40€ la je suis en train de le faire mais moi ca serait avec une coque de 20go lol
Répondre à ce commentaire
27 octobre 2009, 19:01
Approuver ce commentaire (+1)
pareil coque de 20 giga mais on s'en fou en vrai

sa me fait penser que je vais devoir ressouder ma led d'activité du dd
Répondre à ce commentaire
27 octobre 2009, 19:05
Approuver ce commentaire (+1)
Le principal c'est ce que l'on ne voit pas !
Répondre à ce commentaire
27 octobre 2009, 19:11
Approuver ce commentaire (+1)
Moi aussi j'ai récupérer le fichier et là j'ai acheter le disque dur nécessaire reste plus qu'à patienter et je vais me l'installer tranquillement.
Répondre à ce commentaire
27 octobre 2009, 19:27
Approuver ce commentaire (+1)
la je veut transferer mes données importante j' ai juste a transferet le dossier content de la partition 3 c' est ca ??
Répondre à ce commentaire
27 octobre 2009, 19:30
Approuver ce commentaire (+1)
merci pumaz hein ;)
Répondre à ce commentaire
27 octobre 2009, 22:09
Approuver ce commentaire (+1)
Faut savoir rester modeste XD , malgré un tsuami de merci, tu en veux encore . . . allez viens pour un gros câlin :melt: .
Répondre à ce commentaire
27 octobre 2009, 22:22
Approuver ce commentaire (+1)
ça coute 12$ une coque complete de 120giga.
Répondre à ce commentaire
28 octobre 2009, 06:13
Approuver ce commentaire (+1)
au risque de paraitre idiot, si j'ai bien tout compris ca marche qu'avec les Western Digital ?
parce que sur la photo du post c'est quand meme du samsung !!!!
Répondre à ce commentaire
28 octobre 2009, 08:57
Approuver ce commentaire (+1)
Cool reste plus qu'a trouver un boitier.
Répondre à ce commentaire
28 octobre 2009, 09:24
Approuver ce commentaire (+1)

au risque de paraitre idiot, si j'ai bien tout compris ca marche qu'avec les Western Digital ?

parce que sur la photo du post c'est quand meme du samsung !!!!


oh hein, j'ai pris ce que j'avais sous la main comme photo lol :-)

Effectivement cela ne fonctionne qu'avec les WD
Répondre à ce commentaire
28 octobre 2009, 11:17
Approuver ce commentaire (+1)

Cool reste plus qu'a trouver un boitier.


Tu as un laaarge choix ici : http://shop.ebay.fr/...38.l1313&_rdc=1
Répondre à ce commentaire
28 octobre 2009, 18:16
Approuver ce commentaire (+1)

Tu as un laaarge choix ici : http://shop.ebay.fr/...38.l1313&_rdc=1


Merci pour le lien, je n'en avais pas trouvé à si bon marché...

Faut juste faire attention à ce qu'il y est bien le boitier + connectique...
Répondre à ce commentaire
30 octobre 2009, 11:51
Approuver ce commentaire (+1)
exellent il n'y a pû qu'à !
Répondre à ce commentaire
08 novembre 2009, 17:11
Approuver ce commentaire (+1)
bonjour
je souhaiterai savoir
j'ai un DD externe en 2.5 est ce que je peux récupéré les connectique du boitier externe pour brancher celui de la xbox360 et ainsi faire le transferer du 20 giga au 250 giga
ca m éviter d'acheter un kit de transfere pour la 360 merci
Répondre à ce commentaire
08 novembre 2009, 18:57
Approuver ce commentaire (+1)
Normalement non, a confirmer.
Répondre à ce commentaire
Cliquer ici pour continuer sur le forum
Envoyer