360 Modification Disc v1.52

1568 visiteurs sur le site | S'incrire

Accédez aux coordonnées de l’ensemble des techniciens professionnels recommandés par logic-sunrise 20 derniers dossiers et tutoriaux
Xbox 360 / One
360 Modification Disc v1.52

FrostyTheSnowman propose une nouvelle versiion de son disque utilitaire, 360 Modification Disc v1.52. Une fois l'iso gravée, ce disuqe vous permettra de modifier facilement vos lecteurx Xbox 360 Benq, Samsung, et Lite-On en firmware ixtreme 1.52.

Fonctionnement :

- Vous devez posseder une carte VT6421 (ou compatible) installée dans votre PC
- L'isos gravée de 360 Modification Disc v1.52
- Bootez sur le CD, et suivez les instructions.

Tout les fichiers modifiés seront placés à la racine de votre lecteur "C:"

Samsung TS-H943 - C:SAMFILES
BenQ VAD6038 - C:BENFILES
Lite-On DG-16D2S - C:LONFILES

360 Modification Disc v1.52 by FrostyTheSnowman
-----------------------------------------------

Features:

 - Complete Modding Solution for Samsung/BenQ/Lite-On
 - iXtreme v1.51 (12x) Firmware
 - Supports Samsung TS-H943
 - Supports BenQ VAD6038
 - Supports Lite-On DG-16D2S
 - Supports Previously Modded Drives
 - Supports Previously Spoofed Drives
 - 100% DOS Based Dumping & Flashing
 - Supports FAT32 & NTFS Filesystems (WinXP/Vista 32-Bit & 64-Bit)
 - Fully Automatic Dumping & Flashing
 - Step-by-Step Instructions
 - Backup of all drive-related files to HDD

Changes in v1.52:

 - Fixed lockup/freezing issues with NTFS drives
 - Improved BenQ/Samsung dumping/flashing stability
 - Replaced MS-DOS with FreeDOS (more stable)

Changes in v1.51:

 - Updated all firmware to iXtreme v1.51
 - 100% Support for all PC SATA & IDE DVD-ROM drives

Changes in v1.5 Revision 2:

 - Improved dumping/flashing speeds for BenQ/Samsung drives
 - Added 'user firmware dump verification' prompt to prevent possible BenQ bricking
 - Revised menus and more detailed drive flashing/dumping instructions

Changes in v1.5 (Public Release):

 - Initial release

NOTE: This disc requires a VIA VT6421 PCI SATA (or compatible) card
  installed, and an NTFS or FAT32 formatted HDD/partition as the
  'C:' drive for this disc to work properly.
NOTE 2: This disc *might* work with other types of SATA chipsets/cards,
  but it is recommended that you use a VIA VT6421 SATA card.
NOTE 3: USB serial adapters are NOT compatible with this disc!

Usage:

 - Make sure you have a VT6421 (or compatible) PCI SATA card installed in your PC

 - Burn this ISO, and boot this disc in your PC

 - Follow the prompts to mod any Samsung, BenQ, or Lite-On XBOX 360 DVD-ROM drive

 - All firmware dumps, modified firmware, and other files related to the drive being
modified will be placed in the following directories on your 'C' drive:

  Samsung TS-H943 - C:SAMFILES

  BenQ VAD6038 - C:BENFILES

  Lite-On DG-16D2S - C:LONFILES

Disclaimer:

I take absolutely no responsibilty for the use of this disc by anyone. Use at your own risk!

Special Thanks & Credits:

Team Jungle - For the awesome iXtreme v1.51 firmware used by this disc
FreeDOS Project - For the FreeDOS Operating System used by this disc
Winternals - For the NTFSDOS driver used by this disc (NTFS Support)
Dennis Bareis - GETRESP (used to input variables into MS-DOS batch files)
Franck Uberto - XMSDSK (used to create a RAMDISK under MS-DOS)
Geremia, Modfreakz, Podger, Redline99 and Tiros - DOSFLASH (BenQ/Lite-On)
Joseph Lin - MTKFLASH (Samsung)
Caster420 - Firmtool (Samsung/BenQ/Lite-On iXtreme firmware generating)
TJ - DVDKey & DummyGen (used to dump firmware for the Lite-On drive)
DuggyUK - For information on El Torito HDD Emulation used by this disc
Jeudi 19 Mars 2009, 15:38 par Ben&Nuts
19 mars 2009, 20:59
Approuver ce commentaire (+1)
salut, j'veux bien l'avoir cet outil mais pas de lien!!!!!!!
Répondre à ce commentaire
19 mars 2009, 22:23
Approuver ce commentaire (+1)
exact, lors de la redaction de la news, on avait pas eu le temps de mettre la main dessus
Répondre à ce commentaire
20 mars 2009, 09:13
Approuver ce commentaire (+1)
mdr
Répondre à ce commentaire
20 mars 2009, 10:16
Approuver ce commentaire (+1)
c'est marrant, je vois pas de trace d'ixtreme 1.52 dans le changelog. Faut pas news trop vite les gars ! :P
Répondre à ce commentaire
20 mars 2009, 10:46
Approuver ce commentaire (+1)
je ne sais pas si j ai le droit de le mettre mais en voila 1 
si j ai pas droit de le mettre 1 admin effacera je suppose

http://www.dekazeta.net/index.php?autocom=...mp;showfile=564
Répondre à ce commentaire
20 mars 2009, 14:17
Approuver ce commentaire (+1)
Répondre à ce commentaire
21 mars 2009, 09:58
Approuver ce commentaire (+1)
salut
heu ca marche comment ca?? j ai pas trop compris!
ca garde une save du firm et ca flash tout seul ???
ou c est juste un kit pour avoir le firm pour le reinjecter nous meme apres?
merci
Répondre à ce commentaire
23 mars 2009, 12:45
Approuver ce commentaire (+1)
bonjour à tous moi je suis vraiment debutant j'ai un lecteur Benq VAD8038/64930C j'aimerai s'il vous plait pouvoir le flashé y'a t-il quelqu'un qui peu me secourir merci... Sinon j'ai une clé USB elle aussi j'arrive pas Booté deçu PS: au secour :)
Répondre à ce commentaire
Cliquer ici pour continuer sur le forum
Envoyer