xash

Trouvé cette methode, on va voir ce que ça donne je suis bricked donc je test:

How To Fix Ur BRICKED Ps3.

Bricking the PS3 is mostly caused for a bad dev_flash when flashing it using Mount Alejandro (or another homebrew application which permanently flashes, unlike JaiCraB USB FiRM Loader) or a bad .PUP, this is a brief tutorial I made for you to fix this :

1.First of all, download this recovery files. http://www.mediafire...yhbt501m9hgrh12
2.Unzip the .zip file and it will show up two folders (Lv2Diag File 1 & Lv2Diag File 2)
3.Put your PS3 on Recovery Mode (it its bricked it will not show you the Recovery Screen, it will just turn off once you click power+eject)
4.Then format a USB and put the following files on the root: Lv2Diag.self (From the File 1 folder) and PS3UPDAT.PUP (Your current firmware)
5.Put the USB on the right USB port of the PS3 (The one closer to the Disc Reader) and turn it on
6.The screen will be black, just wait 10 minutes approximately and the PS3 will turn off it self (If the PS3 doesn’t turn off after 10 minutes, turn it off manually)
7.Turn the PS3 on and you’ll see the Recovery Mode screen, after this erase everything from your USB and put the Lv2Diag.self (From the File 2 folder) on the USB root
8.Turn off the PS3 and put the USB on the right USB port of the PS3 (The one closer to the Disc Reader)
9.Turn your PS3 on and then it will turn off, turn it on again and your PS3 will be unbricked .

Enjoy .

Bon, au moins j'ai gagné un Trophée !
Passe pas sur la CECHC04 mais ça passe sur la CECHL04. ^^
Enterrement prévu à 17h.


Petit design cadeau et original pour LogicSunrise !

Test en cours sur une CECHC04... j'ai quand même préparé une Croix et un trou dans le jardin au cas ou ^^