Mon contenu
Homme
Finally. The world first reliable Xenon CPU key retrieval solution.
you need:
Matrix / Coolrunner rev D / CR3 Lite (with the onboard oscillator)
USB TTL Converter (NAND-X update cable?)
+ other soldering equipment
Soldering diagram is identical to RGH 1.2
You also need to connect the TTL Converter:
connect power wires VCC (3.3v) and GND
RX wire goes to LED signal pin.
NAND images + XSVF files:
Find the good xsvf file (only good files will blink! other will stay quiet!) - I have good results with 04 -12 files
once you found the file which gives LED blinks, run Monitor COM in JRunner:
Now just press Open Port and run your Xbox:
CPU key will be shown after "A15432" line.
If you see that line only, try another xsvf.
as always, you can support me over Paypal 15432@mail.ru,
