10 réponses à ce sujet

[Breramg]

Bonjour,

J’ai un problème avec une ps4 slim, je m’explique ;

Impossible de connecter la moindre manette dessus, ni par câble ni par Bluetooth. J’ai déjà essayé le petit bouton reset à l’arrière de la manette ainsi que le bouton share et home en même temps.

Rien à faire, du coup je voulais commander l’antenne Bluetooth mais je me disais que si même en filaire ça ne marche pas, ça ne doit pas venir de l’antenne Bluetooth, si ?

Merci d’avance

[NightWolf]

Ça c’est un souci de contrôleur Bluetooth et non d’antenne si c’était l’antenne en filaire tu aurai du lag mais ça fonctionnerai.

[Breramg]

Comment le remplacer ? Il se situe où ?

Sur 100 essais ça a marché 2x en filaire et pendant 3 minutes chrono.

Même en mode sans échec ça ne fonctionne pas, la manette charge mais dès que j’appuie sur le bouton home elle clignote

Modifié par Breramg, 21 novembre 2022 - 22:55.

[Breramg]

bref j’ai localisé la puce et commandé celle-ci. Je vais pouvoir la remplacer avec ma station BGA.

[jerrymark]

If your PS4 is not detecting your controller, there could be several reasons for this issue. Here are some troubleshooting steps you can try:

 

1. **Check the Battery**: Ensure that your controller has sufficient battery power. If the battery is too low, the controller might not connect properly.

 

2. **Reset the Controller**: There's a small reset button on the back of the controller. You can press this button using a small pin or paperclip. After resetting, try pairing the controller again.

 

3. **USB Cable**: If you're using a USB cable to connect the controller to the PS4, make sure the cable is working properly and is firmly connected. A faulty cable might prevent the connection.

 

4. **Another USB Port**: Try connecting the controller to a different USB port on the PS4. Sometimes, a specific USB port might be malfunctioning.

 

5. **Safe Mode**: Boot your PS4 into Safe Mode by holding down the power button for seven seconds until you hear a second beep. From there, you can try rebuilding the database or resetting the settings to default.

 

6. **Update Firmware**: Ensure that your PS4's firmware is up to date. Sometimes, outdated firmware can cause compatibility issues.

 

7. **Pairing the Controller**: If the controller was previously paired with a different PS4, it might not connect to your console. Connect the controller to the PS4 using a USB cable and press the PS button to pair it.

 

8. **Interference**: Make sure there are no strong sources of wireless interference near the console or the controller that could disrupt the connection.

 

9. **Bluetooth Issues**: If you're connecting the controller via Bluetooth, ensure that you're within the recommended range (usually about 10 feet) and that there are no obstacles blocking the signal.

 

10. **Controller Issues**: If none of the above solutions work, there might be an issue with the controller itself. Test the controller on another PS4 if possible or try a different controller on your PS4 to see if the problem persists.

 

11. **Contact Support**: If the problem continues, you might need to contact Sony's customer support or visit a service center for further assistance.

[Amine1234]

Salut ! Désolé d'entendre que tu rencontres des problèmes avec ta PS4 Slim. Si même en utilisant un câble ça ne fonctionne pas, il est peu probable que le problème soit lié à l'antenne Bluetooth. As-tu essayé de réinitialiser complètement ta console ? Cela pourrait résoudre le problème. Si cela ne fonctionne pas, il pourrait être nécessaire de contacter le support technique de Sony pour obtenir une assistance supplémentaire. Bonne chance !

[rickyclerk]

If your PS4 is not detecting your controller, there are several steps you can take to troubleshoot and resolve the issue. Here's a step-by-step guide to help you:

1. Check Controller Connection:

   • Ensure that the controller is properly connected to the PS4 using a USB cable. Sometimes, a loose or damaged cable can lead to connection issues.
   • If you're using a wireless controller, make sure it's properly charged.

2. Reset the Controller:

   • On the back of the controller, there's a small hole near the L2 button. Use a paperclip or a small pin to press the reset button inside the hole.
   • After resetting, connect the controller to the PS4 using a USB cable and press the PS button to see if it gets detected.

3. Try Different USB Cable/Port:

   • If you're using a USB cable to connect the controller, try using a different cable to eliminate the possibility of a faulty cable.
   • Also, try connecting the cable to different USB ports on the PS4 to see if the issue is related to a specific port.

4. Power Cycle the PS4:

   • Turn off the PS4 completely.
   • Unplug the power cable from the back of the PS4 and wait for a few minutes.
   • Plug the power cable back in and turn on the PS4.
   • Try connecting the controller again.

5. Safe Mode:

   • If the above steps don't work, you can try accessing the PS4's Safe Mode. To do this, turn off the PS4, then press and hold the power button until you hear a second beep (about seven seconds after the first beep). Connect the controller to the PS4 using a USB cable and select the "Restart PS4" option.

6. Update the Controller Firmware:

   • If your controller's firmware is outdated, it might cause compatibility issues. Connect the controller to the PS4 using a USB cable and go to Settings > Devices > Controllers > Update Firmware.

7. Check for Interference:

   • If you're using a wireless controller, ensure that there are no wireless devices or objects causing interference between the controller and the PS4.

8. Test with Another Controller:

   • If you have access to another PS4 controller, try connecting it to your PS4 to see if the issue is with the specific controller or the PS4 itself.

9. Contact Sony Support:

   • If none of the above steps resolve the issue, it's possible that there's a hardware problem with either the controller or the PS4. In this case, you might need to contact Sony Support for further assistance or repair options.

[marnusdavid]

If your PS4 is not detecting the controller, there are several troubleshooting steps you can try:

 

1. **Reset the Controller**:

   - Turn off your PS4.

   - Locate the small reset button on the back of the controller (it's a tiny hole near the L2 button).

   - Use a paperclip or a similar object to press and hold the reset button for a few seconds.

   - Connect the controller to the PS4 using a USB cable and turn on the PS4. Try to pair the controller again.

 

2. **Try a Different USB Cable**:

   - Ensure you're using a working USB cable. Some cables are charge-only and may not transmit data. Try a different cable if you have one available.

 

3. **Connect the Controller Directly**:

   - Connect the controller directly to the PS4 using a USB cable. This can help re-establish the connection.

 

4. **Restart the PS4**:

   - Turn off the PS4 completely, then unplug it from the power source. Wait for a minute or so before plugging it back in and turning it on.

 

5. **Pair the Controller Wirelessly**:

   - If you're trying to pair wirelessly, make sure the PS4 is in pairing mode. Press and hold the PS button and the Share button on the controller simultaneously until the light bar starts flashing. Then, go to the PS4 menu and select "Settings" > "Devices" > "Bluetooth Devices" and select "Wireless Controller" from the list.

 

6. **Charge the Controller**:

   - Ensure the controller has sufficient charge. Sometimes, low battery levels can affect connectivity. Use a USB cable to charge it for a while before attempting to pair it again.

 

7. **Check for Interference**:

   - Ensure there are no other wireless devices or large metal objects near the PS4 and controller, as they can interfere with the Bluetooth signal.

 

8. **Check for Updates**:

   - Make sure your PS4 system software and controller firmware are up to date. Connect the controller via USB and go to "Settings" > "Devices" > "Controllers" > "Update the system software".

 

9. **Check for Physical Damage**:

   - Inspect the controller for any physical damage or loose components that might be causing connection issues.

 

10. **Test with Another Controller**:

    - If possible, try using a different controller to see if it's a problem with the specific controller or the PS4 itself.

 

11. **Contact Sony Support**:

    - If none of the above steps work, you may need to contact Sony customer support for further assistance. There may be an underlying hardware issue that requires professional attention.

 

Remember to follow these steps carefully and safely. If you're unsure about any of the steps, it's best to seek assistance from a professional or Sony's official support channels.

[leoa69]

The PS4 may not detect the controller due to a connection issue, low battery, or a faulty controller.                                                                                                                                                                      .

Modifié par leoa69, 28 septembre 2023 - 08:42.

[amunite]

Normalement on peut être quasiment sûr que la puce bluetooth est défectueuse quand il est impossible de connecter sa manette a la console mais que ça fonctionne en mode sans échec. Si ça ne fonctionne pas même en mode sans échec alors il y a de fortes chances que ce soit la NOR qui est corrompues. Sur l'ancienne chaîne Youtube d'Andrew Paul il y a trois vidéos qui expliquent comment résoudre le problème.

[Dryss934]

Beautiful Womans from your town for night