36 replies to this topic

[Alex063]

Ma xbox a été mise à jour il y a moins d'un mois .... Dois je faire un refresh tout de même ?

[Dnijbox974]

Mise à jour du système n'a rien à voir avec FSD.

Pour rafraîchir on supprime le répertoire FSD (et éventuellement le cache) puis on copie à nouveau le répertoire FSD sur le DD.

Il faudra refaire le chemin des jeux.

[Alex063]

Bonjour, je n'ai pas de répertoire FSD mais j'ai Freestyle.

Est ce le même ? 

 

Si oui je le copie sur mon pc, puis je le supprime de mon disque dur externe xbox, puis je le remet c'est ça  ? 

 

Pour vider le cache euh ... je fais comment ? 

Désolé je suis une bille

[Mouflo Mod86]

Supprime direct ton dossier fsd/freestyle et remplace le par un nouveau dossier que tu auras téléchargé, prend la rev 735 de mémoire c'est la dernière.
Renomme ton nouveau dossier à l'identique pour pouvoir redémarrer direct sur fsd.

Pour vider le cache vas sur le menu officiel dans les parametres de stockage.

[Alex063]

je télécharge donc celui ci du site :

 

http://www.logic-sun...style-dash-fsd/

 

par contre il y a un 775 

n'est il pas plus récent ? 

Ce message a été modifié par Alex063 - 16 October 2014 - 09:12.

[Alex063]

Je viens de faire la manipulation

J'ai couper le dossier Freestyle que j'ai mis sur mon bureau du pc au cas ou (il fait + de 400mo)

J'ai remplacer et renommer à l'identique le fsd rev 735 qui ne fait que 80mo

 

Je lance la console, je ne tombe pas sur le menu fsd mais sur le menu classique

J'appuie sur le bouton du milieu xbox, paramètres système, stockage, carte mémoire, éléments système puis cache du contenu, supprimer ? 

[Mouflo Mod86]

Oui c'est bien ça pour le cache.

Pour fsd la différence de taille est normal, sur l'ancien tu as tes jaquettes.
Si tu ne retombe pas sur fsd c'est que tu ne l'as pas renommé à l'identique ou que tu as modifié ton fichier launch.ini sur ton dd.

[Alex063]

Je viens de vérifier, il est bien renommer à l'identique

Et mon launch.ini je ne l'ai pas touché il est daté du 04/09/2014

Je n'ai pas encore vider le cache

je tente de vider dans le début d’après midi pour voir si ça se lancera mieux

 

Dois je prendre le rev 775 ou rester sur le 735 ?

 

Encore merci

[Dnijbox974]

Le fait qu'il ne se lance pas n'a rien à voir avec le cache, tu n'as pas du le renommer à l'identique et/ou ton arborescence est différente.

Par défaut, c'est Hdd:/Freestyle/default.xex donc vérifie que c'est bien comme ça sur ton DD.

La dernière version est 775, tu la trouveras sur realmodscene.

Ce message a été modifié par Dnijbox974 - 16 October 2014 - 11:04.

[Mouflo Mod86]

Oui verifie ton launch.ini, si la ligne pointe un freestyledash.xex c'est que tu avais un très vieux fsd !

[Alex063]

J'ai supprimer le 735 et j'ai remplacer par le 775 de chez logic sunrise

ici : http://www.logic-sun...style-dash-fsd/

 

Malgré ceci la xbox se lance toujours sur le menu de base et plus sous fsd,

 

J'ai ouvert mon Launch.ini je n'ai rien trouvé sur qui ressemblait à fresstyledash.xex

 

Le voici :

 

; launch.xex V3.0 config file

; parsed by simpleIni http://code.jellycan.com/simpleini/

; currently supported devices and paths:

; internal hard disk    Hdd:\

; usb memory stick      Usb:\

; memory unit           Mu:\

; USB memory unit       UsbMu:\

; big block NAND mu     FlashMu:\

; internal slim 4G mu IntMu:\

; internal corona 4g mu MmcMu:\

; CD/DVD                Dvd:\     (not recommended to use this one)

; buttons can point to any xex, or any CON with default.xex in it on any of the above devices

; note that Right Bumper is ALWAYS default to return NXE

; if you want to assign an additional one, use the path Sfc:\dash.xex ie:

; BUT_A = Sfc:\dash.xex

 

 

; all comments and fields in this file are optional, you can remove anything you don't need

; sorry for any double negatives

; njoy, cOz

 

; example entry

; Default = Hdd:\FreeStyle\default.xex

[Paths]

BUT_A = 

BUT_B = Usb:\Freestyle\default.xex

BUT_X = Aucun:\Content

BUT_Y = Usb:\Freestyle\default.xex

Start = 

Back = 

LBump = 

RThumb = 

LThumb = 

 

; Default is what loads when you hold no buttons

; leave this blank if you want NXE as default

Default = Usb:\Freestyle\default.xex

 

; at boot time, default can be overridden based on how the console is turned on

; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default

; note that the Guide item is ALWAYS overridden by option: remotenxe = true

Guide = 

 

; if you power on with the button on the front of the console (or the power button on a remote if remotenxe is not set to true)

; this item will be used instead of default

Power = 

 

; if set, going to system settings from HUD will run this app, override with Right Bumper

Configapp = 

 

; if set, this will be run as a title before any other option occurs, does not get circumvented by held buttons or default

; guide/power opts are processed after this; intended for a short video player to allow replacing bootanim

Fakeanim = 

 

; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped

; as text to a file. Same path restraints as the quick launch buttons.

; if exchandler is set to false, this option does nothing.

; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device

; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only

; checked on boot, so the device must be present at power on and at crash time for this to be effective

; ie: dumpfile = Usb:\crashlog.txt

Dumpfile = 

 

 

; example plugin entry

; plugin1 = Usb:\plugin\aplugin.xex

[Plugins]

plugin1 = 

plugin2 = 

plugin3 = 

plugin4 = 

plugin5 = 

 

 

; these options are never used directly by dash launch but serve to give the configuration program

; a place to keep these values; note that things like ftp and udp servers are only running while installer is running

[Externals]

 

; if true, the configuration application will start a FTP server (user/pass: xbox)

; if not present default is FALSE

ftpserv = false

 

; if ftpserv is true, this is the port that will be used by the FTP server

; if not present default is 21

ftpport = 21

 

; if true, the configuration application will start the xebuild update server

; if not present default is FALSE

updserv = false

 

; if true, the configuration application will start in launch mode instead of options mode

; if not present default is FALSE

calaunch = false

 

; if true, temps in installer and in guide (shuttemps option) will be shown in fahrenheit instead of celsius

; if not present default is FALSE

fahrenheit = false

 

 

[Settings]

 

; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you

; note you must release Y button then press desired QuickLaunchButtons after or use default item

; if not present default is TRUE

nxemini = true

 

; if true ping limit will be removed for system link play (thanks FBDev!)

; if not present default is FALSE

pingpatch = true

 

; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)

; if not present default is FALSE

contpatch = false

 

; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown

; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash

; if not present default is FALSE

fatalfreeze = false

 

; when fatalfreeze is set to false, setting this to true will cause the box to reboot, setting it to false will instead have the box shut down

; note that this option does NOTHING when fatalfreeze is set to true

; if not present default is FALSE

fatalreboot = true

 

; setting this to true will cause the box to reboot (soft reboot) the way it was intended to

; on jtag ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings

; if not present default is TRUE

safereboot = false

 

; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed

; if not present this is set to FALSE

regionspoof = false

 

; when regionspoof is true, you set your region here in hex preceding the value with 0x, for example devkit would be region = 0x7fff

; if not present but regionspoof is set to true, this is set to 0x7FFF

region = 0x7fff

 

; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE

; if not present this is set to FALSE

dvdexitdash = false

 

; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu

; if not present this is set to FALSE

xblaexitdash = false

 

; when set to true, using miniblades system setting options will not exit to NXE

; if not present this is set to FALSE

nosysexit = false

 

; when set to true, miniblades will not appear... ever (requested as child saftey measure)

; note that using this option overrides everything in dash launch that relies on miniblade exits to function

; if not present this is set to FALSE

nohud = false

 

; when set to false, xbox will be capable of finding system updaters

; if not present this is set to TRUE

noupdater = true

 

; when set to true,  dash launch will put all debug strings out to uart

; if not present this is set to FALSE

debugout = false

 

; when set to false, dash launch will not attempt to handle last chance unhandled exceptions

; if set to false, exceptions will also not be dumped to the dumpfile

; if not present this is set to TRUE

exchandler = true

 

; if set to true, this will block the console from resolving LIVE related dns

; if not set this value will be TRUE

liveblock = true

 

; if liveblock is set to true, this will block the console from resolving all MS related dns

; setting this to TRUE will also block apps like freestyle from accessing things like cover images

; *** note that if NO INI is present for launch.xex, this is set to TRUE

; if not set this value will be FALSE

livestrong = false

 

; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item

; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set

; if not set this value will be FALSE

remotenxe = false

 

; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root

; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down

; if not set this value will be FALSE

hddalive = false

 

; in seconds, the interval between when USB devices will be polled for "alive.txt" file

; if not set and hddalive is set to TRUE this value will be 210

hddtimer = 210

 

; attempts to disable popups related to signing in, like "live is blocked" and similar

; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S A LOGIN DIALOG MAY NOT BE PERFECT !!

; !! to sign into live profiles other than auto signing on boot you MUST accept the 'check live for updates' dialog BEFORE enabling this option !!

; if not set this value will be FALSE

signnotice = false

 

; when you hold guide button to shut down xbox, normally the 'cancel' option is selected

; setting this to TRUE will cause the shutdown option to be auto selected instead

; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!

; if not set this value will be FALSE

autoshut = false

 

; when you hold guide button to shut down xbox, normally a dialog comes up

; setting this to TRUE will cause the console to shutdown instead of show a dialog

; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!

; if not set this value will be FALSE

autooff = false

 

; 14699+ has native http functions, but you are forced to be logged into use them

; this patch removes that restriction, set to false to disable it if you have any problems

; if not set this value will be TRUE

xhttp = true

 

; when tempbcast is set to TRUE the raw temp data from smc will be broadcast over UDP at temptime second

; intervals on port tempport

; if not set this value will be FALSE

tempbcast = false

 

; if not set this value will be 10

temptime = 10

 

; if not set this value will be 7030

tempport = 7030

 

; when set to TRUE all titles will have the insecure socket privilege

; if not set this value will be FALSE

sockpatch = false

 

; when set to TRUE dash launch will not erase launchdata before launching a quick launch item

; if not set this value will be FALSE

passlaunch = false

 

; when set to TRUE various functions will be spoofed to make firmware think it's connected to LIVE

; this does not compensate for the fact that it cannot contact LIVE servers

; setting this to TRUE forces liveblock to TRUE

; if not set this value will be FALSE

fakelive = true

 

; when set to TRUE network/cloud storage options should not show up in disk dialogs

; if not set this value will be TRUE

nonetstore = true

 

; when set to TRUE a snapshot of the console temperature data will be displayed in the console shutdown dialog (displayed when guide button is held)

; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!

; enabling this option disables autooff

; if not set this value will be FALSE

shuttemps = false

 

; when true, any devkit profiles on the console will not appear as corrupt and can be used

; any changes such as saving games or getting achievements will resign the profile with the current/retail keyvault

; this seems not to affect glitch/jtag dev crossflash, but could affect these profiles on true devkits

; if not set this value will be FALSE

devprof = false

 

; when true, system link data will be encrypted for communication with devkits

; if not set this value will be FALSE

devlink = false

 

; when true dash launch will perform automatic disk swapping

; WARNING!! do not enable if you use FSD or swap.xex for this !!

; if not set this value will be FALSE

autoswap = true

 

; when true, disables kinect health pseudo video at game launch

; if not set this value will be TRUE

nohealth = true

 

; when true, disables dash locale setup screens when settings already exist

; if not set this value will be TRUE

nooobe = true

 

; when true dash launch will automatically enable fakelive functionality only during official dash and indie play sessions

; if not set this value will be FALSE

autofake = false

[Mouflo Mod86]

Voici le mien qui fonctionne bien normalement. La ligne à bien configurer est en rouge, pense bien a mettre les majuscules aussi dans ton nom de dossier.

Si tu n'as changé que fsd y a vraiment pas de raison que ça ne boot plus automatiquement.

 

 

; launch.xex V3.0 config file

; parsed by simpleIni http://code.jellycan.com/simpleini/

; currently supported devices and paths:

; internal hard disk    Hdd:\

; usb memory stick      Usb:\

; memory unit           Mu:\

; USB memory unit       UsbMu:\

; big block NAND mu     FlashMu:\

; internal slim 4G mu IntMu:\

; internal corona 4g mu MmcMu:\

; CD/DVD                Dvd:\     (not recommended to use this one)

; buttons can point to any xex, or any CON with default.xex in it on any of the above devices

; note that Right Bumper is ALWAYS default to return NXE

; if you want to assign an additional one, use the path Sfc:\dash.xex ie:

; BUT_A = Sfc:\dash.xex

 

 

; all comments and fields in this file are optional, you can remove anything you don't need

; sorry for any double negatives

; njoy, cOz

 

; example entry

; Default = Hdd:\FreeStyle\default.xex

[Paths]

BUT_A = 

BUT_B = 

BUT_X = 

BUT_Y = 

Start = 

Back = 

LBump = 

RThumb = 

LThumb = 

 

; Default is what loads when you hold no buttons

; leave this blank if you want NXE as default

Default = Usb:\FreeStyle\default.xex

 

; at boot time, default can be overridden based on how the console is turned on

; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default

; note that the Guide item is ALWAYS overridden by option: remotenxe = true

Guide = 

 

; if you power on with the button on the front of the console (or the power button on a remote if remotenxe is not set to true)

; this item will be used instead of default

Power = 

 

; if set, going to system settings from HUD will run this app, override with Right Bumper

Configapp = 

 

; if set, this will be run as a title before any other option occurs, does not get circumvented by held buttons or default

; guide/power opts are processed after this; intended for a short video player to allow replacing bootanim

Fakeanim = 

 

; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped

; as text to a file. Same path restraints as the quick launch buttons.

; if exchandler is set to false, this option does nothing.

; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device

; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only

; checked on boot, so the device must be present at power on and at crash time for this to be effective

; ie: dumpfile = Usb:\crashlog.txt

Dumpfile = 

 

 

; example plugin entry

; plugin1 = Usb:\plugin\aplugin.xex

[Plugins]

plugin1 = 

plugin2 = 

plugin3 = 

plugin4 = 

plugin5 = 

 

 

; these options are never used directly by dash launch but serve to give the configuration program

; a place to keep these values; note that things like ftp and upd servers are only running while installer is running

[Externals]

 

; if true, the configuration application will start a FTP server (user/pass: xbox)

; if not present default is FALSE

ftpserv = false

 

; if ftpserv is true, this is the port that will be used by the FTP server

; if not present default is 21

ftpport = 21

 

; if true, the configuration application will start the xebuild update server

; if not present default is FALSE

updserv = true

 

; if true, the configuration application will start in launch mode instead of options mode

; if not present default is FALSE

calaunch = false

 

; if true, temps in installer and in guide (shuttemps option) will be shown in fahrenheit instead of celsius

; if not present default is FALSE

fahrenheit = false

 

 

[Settings]

 

; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you

; note you must release Y button then press desired QuickLaunchButtons after or use default item

; if not present default is TRUE

nxemini = true

 

; if true ping limit will be removed for system link play (thanks FBDev!)

; if not present default is FALSE

pingpatch = true

 

; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)

; if not present default is FALSE

contpatch = true

 

; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown

; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash

; if not present default is FALSE

fatalfreeze = false

 

; when fatalfreeze is set to false, setting this to true will cause the box to reboot, setting it to false will instead have the box shut down

; note that this option does NOTHING when fatalfreeze is set to true

; if not present default is FALSE

fatalreboot = true

 

; setting this to true will cause the box to reboot (soft reboot) the way it was intended to

; on jtag ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings

; if not present default is TRUE

safereboot = true

 

; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed

; if not present this is set to FALSE

regionspoof = true

 

; when regionspoof is true, you set your region here in hex preceding the value with 0x, for examle devkit would be region = 0x7fff

; if not present but regionspoof is set to true, this is set to 0x7FFF

region = 0x7fff

 

; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE

; if not present this is set to FALSE

dvdexitdash = true

 

; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu

; if not present this is set to FALSE

xblaexitdash = true

 

; when set to true, using miniblades system setting options will not exit to NXE

; if not present this is set to FALSE

nosysexit = true

 

; when set to true, miniblades will not appear... ever (requested as child saftey measure)

; note that using this option overrides everything in dash launch that relies on miniblade exits to function

; if not present this is set to FALSE

nohud = false

 

; when set to false, xbox will be capable of finding system updaters

; if not present this is set to TRUE

noupdater = false

 

; when set to true,  dash launch will put all debug strings out to uart

; if not present this is set to FALSE

debugout = false

 

; when set to false, dash launch will not attempt to handle last chance unhandled exceptions

; if set to false, exceptions will also not be dumped to the dumpfile

; if not present this is set to TRUE

exchandler = true

 

; if set to true, this will block the console from resolving LIVE related dns

; if not set this value will be TRUE

liveblock = false

 

; if liveblock is set to true, this will block the console from resolving all MS related dns

; setting this to TRUE will also block apps like freestyle from accessing things like cover images

; *** note that if NO INI is present for launch.xex, this is set to TRUE

; if not set this value will be FALSE

livestrong = false

 

; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item

; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set

; if not set this value will be FALSE

remotenxe = true

 

; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root

; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down

; if not set this value will be FALSE

hddalive = false

 

; in seconds, the interval between when USB devices will be polled for "alive.txt" file

; if not set and hddalive is set to TRUE this value will be 210

hddtimer = 210

 

; attempts to disable popups related to signing in, like "live is blocked" and similar

; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S A LOGIN DIALOG MAY NOT BE PERFECT !!

; !! to sign into live profiles other than auto signing on boot you MUST accept the 'check live for updates' dialog BEFORE enabling this option !!

; if not set this value will be FALSE

signnotice = false

 

; when you hold guide button to shut down xbox, normally the 'cancel' option is selected

; setting this to TRUE will cause the shutdown option to be auto selected instead

; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!

; if not set this value will be FALSE

autoshut = false

 

; when you hold guide button to shut down xbox, normally a dialog comes up

; setting this to TRUE will cause the console to shutdown instead of show a dialog

; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!

; if not set this value will be FALSE

autooff = false

 

; 14699+ has native http functions, but you are forced to be logged into use them

; this patch removes that restriction, set to false to disable it if you have any problems

; if not set this value will be TRUE

xhttp = true

 

; when tempbcast is set to TRUE the raw temp data from smc will be broadcast over UDP at temptime second

; intervals on port tempport

; if not set this value will be FALSE

tempbcast = false

 

; if not set this value will be 10

temptime = 10

 

; if not set this value will be 7030

tempport = 7030

 

; when set to TRUE all titles will have the insecure socket priveledge

; if not set this value will be FALSE

sockpatch = false

 

; when set to TRUE dash launch will not erase launchdata before launching a quick launch item

; if not set this value will be FALSE

passlaunch = false

 

; when set to TRUE various functions will be spoofed to make firmware think it's connected to LIVE

; this does not compensate for the fact that it cannot contact LIVE servers

; setting this to TRUE forces liveblock to TRUE

; if not set this value will be FALSE

fakelive = false

 

; when set to TRUE network/cloud storage options should not show up in disk dialogs

; if not set this value will be TRUE

nonetstore = true

 

; when set to TRUE a snapshot of the console temperature data will be displayed in the console shutdown dialog (displayed when guide button is held)

; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!

; enabling this option disables autooff

; if not set this value will be FALSE

shuttemps = false

 

; when true, any devkit profiles on the console will not appear as corrupt and can be used

; any changes such as saving games or getting achievements will resign the profile with the current/retail keyvault

; this seems not to affect glitch/jtag dev crossflash, but could affect these profiles on true devkits

; if not set this value will be FALSE

devprof = false

 

; when true, system link data will be encrypted for communication with devkits

; if not set this value will be FALSE

devlink = false

 

; when true dash launch will perform automatic disk swapping

; WARNING!! do not enable if you use FSD or swap.xex for this !!

; if not set this value will be FALSE

autoswap = true

 

; when true, disables kinect health pseudo video at game launch

; if not set this value will be TRUE

nohealth = true

 

; when true, disables dash locale setup screens when settings already exist

; if not set this value will be TRUE

nooobe = true

 

; shen true dash launch will automatically enable fakelive functionality only during official dash and indie play sessions

; if not set this value will be FALSE

autofake = false

 

Ce message a été modifié par Mouflo Mod86 - 16 October 2014 - 21:11.

[Alex063]

Alors j'ai fait les modifications dans le .ini et dans le dossier sur lequel j'ai ajouté le S majuscule

 

Par conter ça ne change rien ... j'ai toujours ce menu classique

Je ne sais pas faire les captures d'écran alors je vous monter sur un site :

 

http://www.logic-sun...style-dash-fsd/

 

La seconde capture d'écran tout en bas

Pour moi je suis sur le fsd, mais je pense que je dois remettre le chemin d'accès de mes jeux car je n'ai rien. Mais je n'avais pas ce skin avant ... j'avais métro

[Alex063]

Bon j'ai scanner mes répertoires les jeux qui marchaient marchent ... c'est juste que j'ai le skins classic et pas celui que j'avais ... je suis un gros gros débutant lol

Maintenant je dois tester les autres jeux qui n'allaient pas

[Alex063]

Assasins credd 3 marche  ...pour le moment ....

Comment je dois faire pour changer le skins ?

[Mouflo Mod86]

Tu telecharge un skin compatible avec ta version actuelle de fsd et tu le met dans le dossier skin de fsd. Tu redémarre le menu puis tu vas dans l'onglet skin.

[Alex063]

Tout marchait j'ai joué une fois et boom ça ne marche plus, je vais abandonner assasins Creed je pense et tenter le batman si j'arrive à la faire marcher lol