Nathan_r32_69, des forums de PS3news, propose un utilitaire qui fera le bonheur de tous : SEN Enabler and Disabler 4.40. Celui-ci vient d'être mis à jour à la suite de la sortie du nouveau firmware officiel de Sony passant en version 4.40. Pour rappel, l'homebrew vous permettra la connexion au SEN/PSN pour les consoles équipées de Custom Firmwares 3.55 et 3.56. Cette fois-ci, une seule version existe (plutôt une pour le 3.55 et une pour le 3.56) , plus besoin de choisir celle de son CFW comme précédemment.
You must have a valid ConsoleID connected if you are banned. The program has the option to change the ID, Use it only if you have permission to use an ID, otherwise I am not responsible for any damage. Install only that you have CFW PKG INSTALLED.
Only one version unlike his little brother Enabler & Disabler Spoofer, with GUI Displays a menu screen for comfort, allowing a few choices available.
FeaturesControls
- Added menu
- Added languages English / Spanish
- Added compatibility with ReactPSN (less for JFW)
- Added patch faster
- Enable / disable access to SEN
- Enable / disable the flash write
- Turns off the PS3 system
- Allows PS3 reboot
- Delete history files
- Allows patching ConsoleID
- Allows patching the PSID
- Enables the MAC patch
- Allows patching targetID
- Allows data from a USB patch
- Lets see the PS3 system
- A single PKG for 3.55 and 3.56 CFW
Advanced Option Hidden
- [SQUARE] - Enable / disable access to SEN
- [X's] - Change language between English and Spanish
- [TRIANGLE] - Enable / disable the flash write
- [CIRCLE] - Exits the program
- [R1] - Change the MAC
- [R2] - Deletes history files
- [R3] - patched ConsoleID and PSID from USB (txt files Required)
- [L1] - Patch the PSID
- [L2] - Displays PS3
- [L3] - patched to targetID
- [START] - Turn off the PS3 system
- [SELECT] - Restart your PS3
This option is to load the program with the R2 button pressed, what it does is patch the ConsoleID, PSID, MAC and deletes temporary files, so that the first three work properly you will have to have a USB ConsoleID.txt files, PSID. mac.txt txt and if not fail and start the program menu, if all goes well it will beep and return to XMB
Instructions for R3 Button Option
This option patched the ConsoleID, PSID and MAC directly from a USB device connected to the console. You must have at least one file in the root PATCH a USB, these files are:The default content of the same is as follows:
- ConsoleID.txt
- PSID.txt
- Mac.txt
- ConsoleID.txt
PSID.txt# #
# SEN Enabler patch file #
# #
ConsoleID: 00000001008500020123456789ABCDEF
* Only cambiad what is red without moving PLACE
# #
# SEN Enabler patch file #
# #
PSID: 11112222333344445555666677778888
* Only cambiad what is red without moving PLACE
Mac.txt
Important info: If you install the fix fails to connect Try the following:# #
# SEN Enabler patch file #
# #
MAC: 00 B0DEADCAFE0B 00
* Only cambiad what is red without moving PLACETB: It is important to update the dongle on 2.51, not 2.70, in the latter does not work.
- Restore Default Settings
- Database rebuild
- Restore file system
Télécharger SEN Enabler and Disabler 4.40 v5.0
