I want to share with you a little tutorial for making a very useful tool for RGH process.
In some cases, we need to remove the X-clamp for solder some wires under the X-Clamp.
The easyest way to do this is to use a........X-Clamp!
You need a dremmel and some basic skills.
You need:
1. - 1pcs X-Clamp recovered from some older boards...
2. - 1pcs dremmel
3. - some time to do the job done
Use some glasses for eyes protection!
Steps:
1. Cut with dremmel the X-clamp on the marks:
2. Cut on the second marks
3. Test tool on X-clamp and adjust with the dremmel if needed.
4. Have fun
Please someone translate this in french.
P.S. This is a modest Noel gift from me, to all Logic-Sunrise users
Joyeux Noël!
Fichier(s) joint(s)
-
Step 3 (Custom) (Small).jpg 88,34 Ko
94 téléchargement(s)
-
First cut (Small).jpg 96,5 Ko
126 téléchargement(s)
-
P1030586 (Custom) (Small).JPG 69,66 Ko
152 téléchargement(s)
-
How to use (Small).jpg 110,94 Ko
165 téléchargement(s)
-
In action-1.jpg 130,62 Ko
125 téléchargement(s)
Modifié par modchip-guru, 24 décembre 2012 - 10:17.
