Problème FSD et preview jeux
Débuté par Thib96, déc. 18 2012 23:31
3 réponses à ce sujet
Posté 18 décembre 2012 - 23:31
#1
Bonsoir,
Après plusieurs recherches sur le net, je ne trouve pas comment configurer les informations qui s'affichent normalement à coté des jaquettes de mes jeux.
je suis sous FSD3 la mise à jour des jaquettes est ok mais aucune autre information n’apparaît...
Quelqu'un pourrait-il m'aider à comprendre le fond du problème?
Après plusieurs recherches sur le net, je ne trouve pas comment configurer les informations qui s'affichent normalement à coté des jaquettes de mes jeux.
je suis sous FSD3 la mise à jour des jaquettes est ok mais aucune autre information n’apparaît...
Quelqu'un pourrait-il m'aider à comprendre le fond du problème?
Posté 19 décembre 2012 - 01:09
#2
Salut,
Je sais pas si tu a toucher aux options ou autres mais comme tu en es a la mise en place des pochettes etc... je te conseil de reinstaller FSD proprement.
- Active les mise a jour (update) dans les option de FSD
- Inscrit tes identifiant JQE360 pour le mettre a jour en rev483.
- Redemarre la console.
- Désactive le scan auto, configure tes chemins vers tes jeux en oubliant pas de mettre le scan sur 10.
Il a toujours été conseillé par la team que lors du scan, il ne faut pas naviguer dans les menu de FSD.
Si apres ca, ca ne fonctionne toujours pas, fais un copier/coller de ton launch.ini ici
Je sais pas si tu a toucher aux options ou autres mais comme tu en es a la mise en place des pochettes etc... je te conseil de reinstaller FSD proprement.
- Active les mise a jour (update) dans les option de FSD
- Inscrit tes identifiant JQE360 pour le mettre a jour en rev483.
- Redemarre la console.
- Désactive le scan auto, configure tes chemins vers tes jeux en oubliant pas de mettre le scan sur 10.
Il a toujours été conseillé par la team que lors du scan, il ne faut pas naviguer dans les menu de FSD.
Si apres ca, ca ne fonctionne toujours pas, fais un copier/coller de ton launch.ini ici
Modifié par Corsica94, 19 décembre 2012 - 01:13.
- XboX Slim Glitch Trinity -
Kernel v2.2.16537 - FSD 3.0 Rev775
Skin Windows 8 DASH RT
Xell Reloaded v0.993 - Dashlaunch v3.08 - Xlink/XBS/Link : c0rsica94
Posté 19 décembre 2012 - 18:20
#3
Qu'entends-tu par proprement?
recopier un FSD neutre à la racine de mon HD?
voici déjà mon launch.ini (je t'avouerai que je suis un peut largué ;-p))
; launch.xex V3.0 config file
; parsed by simpleIni http://code.jellycan.com/simpleini/
; currently supported devices and paths:
; internal hard disk Hdd:\
; usb memory stick Usb:\
; memory unit Mu:\
; USB memory unit UsbMu:\
; big block NAND mu FlashMu:\
; internal slim 4G mu IntMu:\
; internal corona 4g mu MmcMu:\
; CD/DVD Dvd:\ (not recommended to use this one)
; buttons can point to any xex, or any CON with default.xex in it on any of the above devices
; note that Right Bumper is ALWAYS default to return NXE
; if you want to assign an additional one, use the path Sfc:\dash.xex ie:
; BUT_A = Sfc:\dash.xex
; all comments and fields in this file are optional, you can remove anything you don't need
; sorry for any double negatives
; njoy, cOz
; example entry
; Default = Hdd:\FreeStyle\default.xex
[Paths]
BUT_A =
BUT_B =
BUT_X =
BUT_Y =
Start =
Back =
LBump =
RThumb =
LThumb =
; Default is what loads when you hold no buttons
; leave this blank if you want NXE as default
Default = Hdd:\FreeStyle\default.xex
; at boot time, default can be overridden based on how the console is turned on
; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default
; note that the Guide item is ALWAYS overridden by option: remotenxe = true
Guide =
; if you power on with the button on the front of the console (or the power button on a remote if remotenxe is not set to true)
; this item will be used instead of default
Power =
; if set, going to system settins from HUD will run this app, override with Right Bumper
Configapp =
; if set, this will be run as a title before any other option occurs, does not get circumvented by held buttons or default
; guide/power opts are processed after this; intended for a short video player to allow replacing bootanim
Fakeanim =
; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped
; as text to a file. Same path restraints as the quick launch buttons.
; if exchandler is set to false, this option does nothing.
; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device
; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only
; checked on boot, so the device must be present at power on and at crash time for this to be effective
; ie: dumpfile = Usb:\crashlog.txt
Dumpfile =
; example plugin entry
; plugin1 = Usb:\plugin\aplugin.xex
[Plugins]
plugin1 =
plugin2 =
plugin3 =
plugin4 =
plugin5 =
; these options are never used directly by dash launch but serve to give the configuration program
; a place to keep these values
[Externals]
; if true, the configuration application will start a FTP server (user/pass: xbox)
; if not present default is FALSE
ftpserv = false
; if ftpserv is true, this is the port that will be used by the FTP server
; if not present default is 21
ftpport = 21
; if true, the configuration application will start in launch mode instead of options mode
; if not present default is FALSE
calaunch = false
; if true, temps in installer and in guide (shuttemps option) will be shown in farenheit instead of celcius
; if not present default is FALSE
farenheit = false
[Settings]
; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you
; note you must release Y button then press desired QuickLaunchButtons after or use default item
; if not present default is TRUE
nxemini = true
; if true ping limit will be removed for system link play (thanks FBDev!)
; if not present default is FALSE
pingpatch = true
; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)
; if not present default is FALSE
contpatch = true
; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown
; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash
; if not present default is FALSE
fatalfreeze = false
; when fatalfreeze is set to false, setting this to true will cause the box to reboot, setting it to false will instead have the box shut down
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
fatalreboot = false
; setting this to true will cause the box to reboot (soft reboot) the way it was intended to
; on jtag ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings
; if not present default is TRUE
safereboot = true
; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed
; if not present this is set to FALSE
regionspoof = false
; when regionspoof is true, you set your region here in hex preceding the value with 0x, for examle devkit would be region = 0x7fff
; if not present but regionspoof is set to true, this is set to 0x7FFF
region = 0x7fff
; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE
; if not present this is set to FALSE
dvdexitdash = false
; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu
; if not present this is set to FALSE
xblaexitdash = false
; when set to true, using miniblades system setting options will not exit to NXE
; if not present this is set to FALSE
nosysexit = false
; when set to true, miniblades will not appear... ever (requested as child saftey measure)
; note that using this option overrides everything in dash launch that relies on miniblade exits to function
; if not present this is set to FALSE
nohud = false
; when set to false, xbox will be capable of finding system updaters
; if not present this is set to TRUE
noupdater = true
; when set to true, dash launch will put all debug strings out to uart
; if not present this is set to FALSE
debugout = false
; when set to false, dash launch will not attempt to handle last chance unhandled exceptions
; if set to false, exceptions will also not be dumped to the dumpfile
; if not present this is set to TRUE
exchandler = true
; if set to true, this will block the console from resolving LIVE related dns
; if not set this value will be TRUE
liveblock = true
; if liveblock is set to true, this will block the console from resolving all MS related dns
; setting this to TRUE will also block apps like freestyle from accessing things like cover images
; *** note that if NO INI is present for launch.xex, this is set to TRUE
; if not set this value will be FALSE
livestrong = false
; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item
; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set
; if not set this value will be FALSE
remotenxe = false
; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root
; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down
; if not set this value will be FALSE
hddalive = false
; in seconds, the interval between when USB devices will be polled for "alive.txt" file
; if not set and hddalive is set to TRUE this value will be 210
hddtimer = 210
; attempts to disable popups related to signing in, like "live is blocked" and similar
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S A LOGIN DIALOG MAY NOT BE PERFECT !!
; !! to sign into live profiles other than auto signing on boot you MUST accept the 'check live for updates' dialog BEFORE enabling this option !!
; if not set this value will be FALSE
signnotice = false
; when you hold guide button to shut down xbox, normally the 'cancel' option is selected
; setting this to TRUE will cause the shutdown option to be auto selected instead
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autoshut = false
; when you hold guide button to shut down xbox, normally a dialog comes up
; setting this to TRUE will cause the console to shutdown instead of show a dialog
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autooff = false
; 14699+ has native http functions, but you are forced to be logged into use them
; this patch removes that restriction, set to false to disable it if you have any problems
; if not set this value will be TRUE
xhttp = true
; when tempbcast is set to TRUE the raw temp data from smc will be broadcast over UDP at temptime second
; intervals on port tempport
; if not set this value will be FALSE
tempbcast = false
; if not set this value will be 10
temptime = 10
; if not set this value will be 7030
tempport = 7030
; when set to TRUE all titles will have the insecure socket priveledge
; if not set this value will be FALSE
sockpatch = false
; when set to TRUE dash launch will not erase launchdata before launching a quick launch item
; if not set this value will be FALSE
passlaunch = false
; when set to TRUE various functions will be spoofed to make firmware think it's connected to LIVE
; this does not compensate for the fact that it cannot contact LIVE servers
; setting this to TRUE forces liveblock to TRUE
; if not set this value will be FALSE
fakelive = false
; when set to TRUE network/cloud storage options should not show up in disk dialogs
; if not set this value will be TRUE
nonetstore = true
; when set to TRUE a snapshot of the console temperature data will be displayed in the console shutdown dialog (displayed when guide button is held)
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; enabling this option disables autooff
; if not set this value will be FALSE
shuttemps = false
; when true, any devkit profiles on the console will not appear as corrupt and can be used
; any changes such as saving games or getting achievements will resign the profile with the current/retail keyvault
; this seems not to affect glitch/jtag dev crossflash, but could affect these profiles on true devkits
; if not set this value will be FALSE
devprof = false
; when true, system link data will be encrypted for communication with devkits
; if not set this value will be FALSE
devlink = false
; when true dash launch will perform automatic disk swapping
; WARNING!! do not enable if you use FSD or swap.xex for this !!
; if not set this value will be FALSE
autoswap = false
; when true, disables kinect health pseudo video at game launch
; if not set this value will be TRUE
nohealth = true
; when true, disables dash locale setup screens when settings already exist
; if not set this value will be TRUE
nooobe = true
; shen true dash launch will automatically enable fakelive functionality only during official dash and indie play sessions
; if not set this value will be FALSE
autofake = false
recopier un FSD neutre à la racine de mon HD?
voici déjà mon launch.ini (je t'avouerai que je suis un peut largué ;-p))
; launch.xex V3.0 config file
; parsed by simpleIni http://code.jellycan.com/simpleini/
; currently supported devices and paths:
; internal hard disk Hdd:\
; usb memory stick Usb:\
; memory unit Mu:\
; USB memory unit UsbMu:\
; big block NAND mu FlashMu:\
; internal slim 4G mu IntMu:\
; internal corona 4g mu MmcMu:\
; CD/DVD Dvd:\ (not recommended to use this one)
; buttons can point to any xex, or any CON with default.xex in it on any of the above devices
; note that Right Bumper is ALWAYS default to return NXE
; if you want to assign an additional one, use the path Sfc:\dash.xex ie:
; BUT_A = Sfc:\dash.xex
; all comments and fields in this file are optional, you can remove anything you don't need
; sorry for any double negatives
; njoy, cOz
; example entry
; Default = Hdd:\FreeStyle\default.xex
[Paths]
BUT_A =
BUT_B =
BUT_X =
BUT_Y =
Start =
Back =
LBump =
RThumb =
LThumb =
; Default is what loads when you hold no buttons
; leave this blank if you want NXE as default
Default = Hdd:\FreeStyle\default.xex
; at boot time, default can be overridden based on how the console is turned on
; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default
; note that the Guide item is ALWAYS overridden by option: remotenxe = true
Guide =
; if you power on with the button on the front of the console (or the power button on a remote if remotenxe is not set to true)
; this item will be used instead of default
Power =
; if set, going to system settins from HUD will run this app, override with Right Bumper
Configapp =
; if set, this will be run as a title before any other option occurs, does not get circumvented by held buttons or default
; guide/power opts are processed after this; intended for a short video player to allow replacing bootanim
Fakeanim =
; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped
; as text to a file. Same path restraints as the quick launch buttons.
; if exchandler is set to false, this option does nothing.
; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device
; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only
; checked on boot, so the device must be present at power on and at crash time for this to be effective
; ie: dumpfile = Usb:\crashlog.txt
Dumpfile =
; example plugin entry
; plugin1 = Usb:\plugin\aplugin.xex
[Plugins]
plugin1 =
plugin2 =
plugin3 =
plugin4 =
plugin5 =
; these options are never used directly by dash launch but serve to give the configuration program
; a place to keep these values
[Externals]
; if true, the configuration application will start a FTP server (user/pass: xbox)
; if not present default is FALSE
ftpserv = false
; if ftpserv is true, this is the port that will be used by the FTP server
; if not present default is 21
ftpport = 21
; if true, the configuration application will start in launch mode instead of options mode
; if not present default is FALSE
calaunch = false
; if true, temps in installer and in guide (shuttemps option) will be shown in farenheit instead of celcius
; if not present default is FALSE
farenheit = false
[Settings]
; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you
; note you must release Y button then press desired QuickLaunchButtons after or use default item
; if not present default is TRUE
nxemini = true
; if true ping limit will be removed for system link play (thanks FBDev!)
; if not present default is FALSE
pingpatch = true
; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)
; if not present default is FALSE
contpatch = true
; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown
; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash
; if not present default is FALSE
fatalfreeze = false
; when fatalfreeze is set to false, setting this to true will cause the box to reboot, setting it to false will instead have the box shut down
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
fatalreboot = false
; setting this to true will cause the box to reboot (soft reboot) the way it was intended to
; on jtag ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings
; if not present default is TRUE
safereboot = true
; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed
; if not present this is set to FALSE
regionspoof = false
; when regionspoof is true, you set your region here in hex preceding the value with 0x, for examle devkit would be region = 0x7fff
; if not present but regionspoof is set to true, this is set to 0x7FFF
region = 0x7fff
; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE
; if not present this is set to FALSE
dvdexitdash = false
; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu
; if not present this is set to FALSE
xblaexitdash = false
; when set to true, using miniblades system setting options will not exit to NXE
; if not present this is set to FALSE
nosysexit = false
; when set to true, miniblades will not appear... ever (requested as child saftey measure)
; note that using this option overrides everything in dash launch that relies on miniblade exits to function
; if not present this is set to FALSE
nohud = false
; when set to false, xbox will be capable of finding system updaters
; if not present this is set to TRUE
noupdater = true
; when set to true, dash launch will put all debug strings out to uart
; if not present this is set to FALSE
debugout = false
; when set to false, dash launch will not attempt to handle last chance unhandled exceptions
; if set to false, exceptions will also not be dumped to the dumpfile
; if not present this is set to TRUE
exchandler = true
; if set to true, this will block the console from resolving LIVE related dns
; if not set this value will be TRUE
liveblock = true
; if liveblock is set to true, this will block the console from resolving all MS related dns
; setting this to TRUE will also block apps like freestyle from accessing things like cover images
; *** note that if NO INI is present for launch.xex, this is set to TRUE
; if not set this value will be FALSE
livestrong = false
; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item
; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set
; if not set this value will be FALSE
remotenxe = false
; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root
; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down
; if not set this value will be FALSE
hddalive = false
; in seconds, the interval between when USB devices will be polled for "alive.txt" file
; if not set and hddalive is set to TRUE this value will be 210
hddtimer = 210
; attempts to disable popups related to signing in, like "live is blocked" and similar
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S A LOGIN DIALOG MAY NOT BE PERFECT !!
; !! to sign into live profiles other than auto signing on boot you MUST accept the 'check live for updates' dialog BEFORE enabling this option !!
; if not set this value will be FALSE
signnotice = false
; when you hold guide button to shut down xbox, normally the 'cancel' option is selected
; setting this to TRUE will cause the shutdown option to be auto selected instead
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autoshut = false
; when you hold guide button to shut down xbox, normally a dialog comes up
; setting this to TRUE will cause the console to shutdown instead of show a dialog
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autooff = false
; 14699+ has native http functions, but you are forced to be logged into use them
; this patch removes that restriction, set to false to disable it if you have any problems
; if not set this value will be TRUE
xhttp = true
; when tempbcast is set to TRUE the raw temp data from smc will be broadcast over UDP at temptime second
; intervals on port tempport
; if not set this value will be FALSE
tempbcast = false
; if not set this value will be 10
temptime = 10
; if not set this value will be 7030
tempport = 7030
; when set to TRUE all titles will have the insecure socket priveledge
; if not set this value will be FALSE
sockpatch = false
; when set to TRUE dash launch will not erase launchdata before launching a quick launch item
; if not set this value will be FALSE
passlaunch = false
; when set to TRUE various functions will be spoofed to make firmware think it's connected to LIVE
; this does not compensate for the fact that it cannot contact LIVE servers
; setting this to TRUE forces liveblock to TRUE
; if not set this value will be FALSE
fakelive = false
; when set to TRUE network/cloud storage options should not show up in disk dialogs
; if not set this value will be TRUE
nonetstore = true
; when set to TRUE a snapshot of the console temperature data will be displayed in the console shutdown dialog (displayed when guide button is held)
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; enabling this option disables autooff
; if not set this value will be FALSE
shuttemps = false
; when true, any devkit profiles on the console will not appear as corrupt and can be used
; any changes such as saving games or getting achievements will resign the profile with the current/retail keyvault
; this seems not to affect glitch/jtag dev crossflash, but could affect these profiles on true devkits
; if not set this value will be FALSE
devprof = false
; when true, system link data will be encrypted for communication with devkits
; if not set this value will be FALSE
devlink = false
; when true dash launch will perform automatic disk swapping
; WARNING!! do not enable if you use FSD or swap.xex for this !!
; if not set this value will be FALSE
autoswap = false
; when true, disables kinect health pseudo video at game launch
; if not set this value will be TRUE
nohealth = true
; when true, disables dash locale setup screens when settings already exist
; if not set this value will be TRUE
nooobe = true
; shen true dash launch will automatically enable fakelive functionality only during official dash and indie play sessions
; if not set this value will be FALSE
autofake = false
Posté 23 mai 2024 - 17:18
#4
The Terabox Hack is a modified version of the Terabox cloud storage app, offering enhanced features like increased storage capacity and ad-free experience.
2 utilisateur(s) li(sen)t ce sujet
0 invité(s) et 2 utilisateur(s) anonyme(s)