hello guys, i've seen the forum in in francais so sorry for me if i speak in english. i brought a wasabi from store logic sunrise but after the arrive and the mountig phase i discovere that i have the old pcb, the version without the blue white pin on the board. i contacted the storesupport, thay say to me to send them the product and also to ask informations in the ls forum.have you any idea about this issue?
ps i flashed the 1.2b2 firmware with green light, in pass throught all si working, in emulation it reboot on the logo in loop, sometimes give e64 errors, sometimes dont satart and i can see only black screen.
thank you
wasabi360 first revision - emulation problem
Started by xgiovio, Jan 19 2012 19:04
4 replies to this topic
Posté 20 January 2012 - 10:39
#3
Camoi
-
- Members
-
- 21 Messages :
Sunriseur
Posté 20 January 2012 - 11:42
#4
xgiovio
-
- Members
-
- 3 Messages :
Nouveau / peu actif
yes extracted from my benq via Jungle Flasher, i put the Key.bin in wasabi folder. my benq is modded to firmware 3.0 lt+ . it a problem or i have to flash the original one?Hi,
You've extracted and copied the key.bin in the "wasabi" your hard drive?
onother tips, i forgot to mention. my drive is partially working. the xbox is pretty new, it'a an elite. but the drive before doing any wasabi modify, red only cd and not dvd, after some time it began to read nothing. but the drive is live, you can eject the disc via dashboard and attached to pc is recognised, so i think the problem is the lens but it's important for the wasabi functionality? thank you
Posté 20 January 2012 - 11:45
#5
xgiovio
-
- Members
-
- 3 Messages :
Nouveau / peu actif
hello, thank you also for the answer. have you got the first or second wasabi revision? i red you post before post in this area. i tried to change sata to new cables. i check the cable connection. The first "xb" is to connect to xbox and the "dr" is to connect to drive. in this mode emulation loop reboot. if i try to invert, xb to drive and dr to xbox it start both in in emulation and pass throught but in both dashboard there isnt the mixed disc but only the open tray and if i click the reald drive opens. thank you. any idea?Hi,
I have the same issue (passtrought Ok, Emulation reboot). See my post, but in french Link.
To solve it, check both sata cable connected to the wasabi. Maybe, you have swap them. Order is important.
I fix that, and now, it works like a charm. Give it a try.
Regards,
Camoi
0 utilisateur(s) sur ce sujet
0 invité(s) et 0 utilisateur(s) anonyme(s)
