32 réponses à ce sujet

[crash251]

c'est que je pensait aussi que sa soit le coté hardware coté graphique qui lâche

[jigsaw]

:/ possède tu un dongle ?

oui tout a fait !
une ps3key

[crash251]

essai de passer service mode

[jigsaw]

depuis le départ, il m'est impossible de passer en service mode....
en surfant sur le forum, j'ai trouvé ce post, vu que j'ai plus rien a perdre :

http://www.logic-sun...ricker-une-ps3/

pour l'instant, j'en suis a l'étape 1, mais la console ne veut pas s'éteindre après presque 30 mn ....

ca sent le paté tout ca non ?

[g-p-56]

Moui :/

quelle version de PS3 possède tu ? la tu déjà démonté ? tu a déjà eu des problème avec ?

si tu ne la jamais démonter ou quelle est encore sous garantie essaie de contacter sony et de te plaindre en disant que c'est inadmissible qu'une MAJ est rendu ta PS3 inutilisable tout en restant calme ^^ tu pou-rat peut-être espéré un geste .

[jigsaw]

Moui :/

quelle version de PS3 possède tu ? la tu déjà démonté ? tu a déjà eu des problème avec ?

si tu ne la jamais démonter ou quelle est encore sous garantie essaie de contacter sony et de te plaindre en disant que c'est inadmissible qu'une MAJ est rendu ta PS3 inutilisable tout en restant calme ^^ tu pou-rat peut-être espéré un geste .

Je l'ai acheté le 6 novembre dernier.....
c'est le pack 320 Giga Fifa 11.
J'ai pas d'extension de garantie, juste la garantie du ticket de caisse.

J'ai appelé Carrefour, là ou j'ai acheté la PS3, je dois leurs rapporter.
Bon, je n'ai pas le carton d'origine, j'espère qu'ils vont pas me prendre la tete pour ca....
J'irai la rapporter demain je pense.... et dois compter un certain moment pour la récupérer (ils doivent pas etre presser....)

Pensez vous que j'aurais à payer quoi que ce soit ?

[milanotiti]

tu etais en firmware 3.41 + dongle cé ca ?
tu as voulu metre a jour via usb ou internet ?

[jigsaw]

tu etais en firmware 3.41 + dongle cé ca ?
tu as voulu metre a jour via usb ou internet ?

via usb !

[crash251]

il vont de la prendre

[g-p-56]

peut être même faire un échange directe avec un peu de chance tu n'aura pas un PS3 en 3.56

[jigsaw]

peut être même faire un échange directe avec un peu de chance tu n'aura pas un PS3 en 3.56

je pense pas que ce soit une réelle chance d'etre en firmware 3.56, malgré que je ne joue pas en ligne....
après question d'installer les CFW, c'est peut etre handicapant....non ?

D'après la dame que j'ai appelé Carrefour, ils feraient un retour direct chez Sony, pas d'échange, car j'avais pas pris d'extension de garantie....(ben toujours payé plus....), enfin je verrais bien, je vais tout de même insister pour réinstaller, on sait jamais !

Au fait, au dernière nouvelles, lorsque j'avais formaté mon disque dur, la led de la ps3 du HDD ne clignotait pas du tout, et rien de rien à l'écran, que ce soit en HDMI ou en vga....

[jigsaw]

Bonjour à tous,

voici le fichier log qui était présent sur la clé USB lorsque j'avais tenté un downgrade via ce post :

manufacturing updating start
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is enabled...
creating system regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT)
creating system regions done.
boot from nor flash...
creating nor flash regions...
create storage region: (region id = 2)
create storage region: (region id = 3)
creating flash regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
create storage region: (region id = 4)
format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
create storage region: (region id = 5)
create storage region: (region id = 6)
Initializing
taking a while...
start Updating Proccess
Initialize elapsed time = 53 msec
check UPL
Check UPL elapsed time = 54 msec
check Package Size
get package size elapsed time = 16 msec
start Updating Package
Update packages num = 27
Update packages total size = 139014019
Update Package Revoke list
read package revoke list package (576 bytes) elapsed = 7 msec
update package revoke list elapsed = 185 msec
Update Package Revoke list done(0x8002f000)
Update Core OS Package
read core os package (4808786 bytes) elapsed = 350 msec
update core os package elapsed = 291 msec
Update Core OS Package done(0x8002f14b)
update package elapsed time = 833 msec
Updating or Verifying failure 0x8002f14b
UpMng.UpdatePackage() failure
manufacturing updating FAILURE(0x8002f14b)
Total Elapsed time = 19238 msec

A la différence, ma PS3 reste allumée lorsque il tente de chercher des données dans le HDD.
Je la laisse tourner, des fois que ca fonctionne...

[jigsaw]

Bon, sachant que je n'aime pas renoncer si facilement, j'ai testé avec une mise a jour officielle 3.41
avec la méthode citée plus haut, et après maintes reprises, tout a fonctionné a merveille !

voici le fichier log :

manufacturing updating start
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is enabled...
creating system regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT)
creating system regions done.
boot from nor flash...
creating nor flash regions...
create storage region: (region id = 2)
create storage region: (region id = 3)
creating flash regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
create storage region: (region id = 4)
format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
create storage region: (region id = 5)
create storage region: (region id = 6)
Initializing
taking a while...
start Updating Proccess
Initialize elapsed time = 66 msec
check UPL
Check UPL elapsed time = 74 msec
check Package Size
get package size elapsed time = 26 msec
start Updating Package
Update packages num = 30
Update packages total size = 162260220
Update Package Revoke list
read package revoke list package (576 bytes) elapsed = 24 msec
update package revoke list elapsed = 185 msec
Update Package Revoke list done(0x8002f000)
Update Core OS Package
read core os package (5182047 bytes) elapsed = 354 msec
update core os package elapsed = 49488 msec
Update Core OS Package done(0x8002f000)
Update VSH Package
sys_memory_container_create() success(id = 0xc0effffe)
Update VSH's package : 1/22
read vsh package (1847 bytes) elapsed = 3 msec
decrypt and verify vsh package elapsed = 46 msec
write vsh package elapsed = 118 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 25 msec
Update VSH's package : 2/22
read vsh package (4779244 bytes) elapsed = 331 msec
decrypt and verify vsh package elapsed = 325 msec
write vsh package elapsed = 440 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 324 msec
Update VSH's package : 3/22
read vsh package (1927089 bytes) elapsed = 142 msec
decrypt and verify vsh package elapsed = 149 msec
write vsh package elapsed = 128 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 133 msec
Update VSH's package : 4/22
read vsh package (5498561 bytes) elapsed = 395 msec
decrypt and verify vsh package elapsed = 364 msec
write vsh package elapsed = 545 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 385 msec
Update VSH's package : 5/22
read vsh package (2010269 bytes) elapsed = 145 msec
decrypt and verify vsh package elapsed = 154 msec
write vsh package elapsed = 186 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 158 msec
Update VSH's package : 6/22
read vsh package (25242 bytes) elapsed = 11 msec
decrypt and verify vsh package elapsed = 47 msec
write vsh package elapsed = 52 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 25 msec
Update VSH's package : 7/22
read vsh package (7663270 bytes) elapsed = 570 msec
decrypt and verify vsh package elapsed = 414 msec
write vsh package elapsed = 1529 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 419 msec
Update VSH's package : 8/22
read vsh package (10258879 bytes) elapsed = 709 msec
decrypt and verify vsh package elapsed = 307 msec
write vsh package elapsed = 1964 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 470 msec
Update VSH's package : 9/22
read vsh package (8773195 bytes) elapsed = 629 msec
decrypt and verify vsh package elapsed = 262 msec
write vsh package elapsed = 1228 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 360 msec
Update VSH's package : 10/22
read vsh package (8827678 bytes) elapsed = 645 msec
decrypt and verify vsh package elapsed = 343 msec
write vsh package elapsed = 1127 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 451 msec
Update VSH's package : 11/22
read vsh package (6182668 bytes) elapsed = 443 msec
decrypt and verify vsh package elapsed = 226 msec
write vsh package elapsed = 309 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 299 msec
Update VSH's package : 12/22
read vsh package (10251215 bytes) elapsed = 709 msec
decrypt and verify vsh package elapsed = 276 msec
write vsh package elapsed = 612 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 393 msec
Update VSH's package : 13/22
read vsh package (10187344 bytes) elapsed = 704 msec
decrypt and verify vsh package elapsed = 283 msec
write vsh package elapsed = 901 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 428 msec
Update VSH's package : 14/22
read vsh package (10381187 bytes) elapsed = 726 msec
decrypt and verify vsh package elapsed = 282 msec
write vsh package elapsed = 866 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 420 msec
Update VSH's package : 15/22
read vsh package (9899962 bytes) elapsed = 693 msec
decrypt and verify vsh package elapsed = 283 msec
write vsh package elapsed = 1135 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 437 msec
Update VSH's package : 16/22
read vsh package (8210627 bytes) elapsed = 578 msec
decrypt and verify vsh package elapsed = 225 msec
write vsh package elapsed = 1060 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 327 msec
Update VSH's package : 17/22
read vsh package (10382360 bytes) elapsed = 745 msec
decrypt and verify vsh package elapsed = 288 msec
write vsh package elapsed = 1215 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 468 msec
Update VSH's package : 18/22
read vsh package (9649989 bytes) elapsed = 672 msec
decrypt and verify vsh package elapsed = 392 msec
write vsh package elapsed = 5291 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 735 msec
Update VSH's package : 19/22
read vsh package (7751745 bytes) elapsed = 542 msec
decrypt and verify vsh package elapsed = 374 msec
write vsh package elapsed = 3965 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 606 msec
Update VSH's package : 20/22
read vsh package (8165430 bytes) elapsed = 587 msec
decrypt and verify vsh package elapsed = 388 msec
write vsh package elapsed = 2703 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 596 msec
Update VSH's package : 21/22
read vsh package (8287111 bytes) elapsed = 588 msec
decrypt and verify vsh package elapsed = 372 msec
write vsh package elapsed = 4655 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 686 msec
Update VSH's package : 22/22
read vsh package (5315230 bytes) elapsed = 374 msec
decrypt and verify vsh package elapsed = 243 msec
write vsh package elapsed = 652 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare vsh package elapsed = 315 msec
Update VSH Package done(0x8002f000)
Bul-ray Disc Player Revoke
read bdp revoke package (1905 bytes) elapsed = 27 msec
decrypt and verify bdp revoke package elapsed = 51 msec
write bdp revoke package elapsed = 42 msec
flush_cache(0x100000000000001)
flush_cache() SUCCESS
compare bdprevoke package elapsed = 61 msec
Bul-ray Disc Player Revoke done(0x8002f000)
Update Program Revoke list
read program revoke list package (736 bytes) elapsed = 26 msec
update program revoke list elapsed = 2455 msec
Update Program Revoke list done(0x8002f000)
Update BD firmware
read BD firmware package (1966992 bytes) elapsed = 146 msec
update BD firmware elapsed = 313 msec
read BD firmware package (951040 bytes) elapsed = 68 msec
update BD firmware elapsed = 265 msec
read BD firmware package (951040 bytes) elapsed = 69 msec
update BD firmware elapsed = 271 msec
read BD firmware package (951040 bytes) elapsed = 69 msec
update BD firmware elapsed = 260 msec
read BD firmware package (1639296 bytes) elapsed = 121 msec
update BD firmware elapsed = 282 msec
read BD firmware package (787200 bytes) elapsed = 59 msec
update BD firmware elapsed = 260 msec
read BD firmware package (1639296 bytes) elapsed = 117 msec
update BD firmware elapsed = 272 msec
Update BD firmware done(0x8002f000)
Update Multi-Card controller firmware
read MCC package (28636 bytes) elapsed = 24 msec
update MCC elapsed = 46 msec
Update Multi-Card controller firmware done(0x8002f000)
Update BlueTooth firmware
read BT package (644322 bytes) elapsed = 50 msec
update BT elapsed = 79 msec
Update BlueTooth firmware done(0x8002f000)
Update System controller firmware
read SC patch package (4864 bytes) elapsed = 23 msec
read SC patch package (4864 bytes) elapsed = 25 msec
read SC patch package (4864 bytes) elapsed = 25 msec
read SC patch package (4864 bytes) elapsed = 25 msec
read SC patch package (4864 bytes) elapsed = 26 msec
read SC patch package (4864 bytes) elapsed = 26 msec
read SC patch package (4864 bytes) elapsed = 25 msec
read SC patch package (4864 bytes) elapsed = 24 msec
Update System controller firmware done(0x8002f000)
update package elapsed time = 113575 msec
post processiong...
post processiong done
cleanup update status (ret = 0)
os version = 03.4100
build_version = 45039,20100721
region of core os package = 0x40000000
build_target = CEX-ww
build target id = 0x83
manufacturing updating SUCCESS(0x8002f000)
set product mode (ret = 0)
Total Elapsed time = 133547 msec

Après, j'ai pu donc installer la mise a jour en 3.55 sans le moindre soucis !!

grand merci a tous