La méthode pour dumper le contenu des PS4 dévoilée !

Installation

 

Installing Raspbian

 

Turn the win32diskimage

 

 

1 - In "Image file" select the image Raspbian that you downloaded.

2 - In "Device" select the drive that is your SD card.

3 - Click on "Write" to start the recording process.

 

After finishing the process, put the SD card into the Raspberry Pi and connect it using a USB cable.

 

Remote Shell in Raspbian

Two minutes after starting the Raspberry Pi, turn the Putty.

 

 

1 - In the Host Name put: raspberrypi. If you do not work correctly, go to the settings of your router, and find the IP of the Raspberry Pi.

2 - Select SSH

3 - Select Open

 

Installing the application

 

He will request the login place "pi" to the user and "raspberry" for the password.

 

Note: For additional information about JaiCraB's developments, refer to JaiSpiMod: JaiSpiMod.hex for Teensy++ 2.0 PS4 Development by JaiCraB and JAISPI V1.0 Arrives, Read / Write PS4 MX25L25635 Memory by JaiCraB.

 

Enter the following commands:

 

sudo -s

cd / bin

wget http://jaicrab.org/P...s/JAISPI/jaispi

chmod + x jaispi

echo "#blacklist spi-bcm2708"> /etc/modprobe.d/raspi-blacklist.conf

echo "blacklist i2c-bcm2708" >> /etc/modprobe.d/raspi-blacklist.conf

reboot

 

Full installation. Place Putty to access the Raspberry Pi. To run the command jaispi you will have to ask root access (sudo -s)

 

# Sudo -s

# Jaispi -i / dev / spidev0.0

 

Options:

 

-i /dev/spidevX.X Get the flash ID

-r file.bin /dev/spidevX.X Read all the flash of a file

/dev/spidevX.X -e Deletes all flash

-p file.bin /dev/spidevX.X Records only the different blocks of a file

-v file.bin /dev/spidevX.X Check the blocks of a file

 

Get the ID: -i: Displays information about the flash.

 

#jaispi -i /dev/spidev0.0

JaiSpi v1.0

ID: 0xC22019 MX25L25635

 

Reading: -r: Makes a full dump of the flash (It takes about 35 sec)

 

#jaispi -r DUMP.bin /dev/spidev0.0

JaiSpi v1.0

ID: 0xC22019 MX25L25635

Reading ...

0x02000000

Done!

 

Delete: -e: Clean all the flash (It takes around 1min 30sec and)

 

#jaispi -and /dev/spidev0.0

JaiSpi v1.0

ID: 0xC22019 MX25L25635

Erasing blocks ...

Done!

 

Record: -p: Records in flash only the sectors with change (It takes around 1min 30sec and)

 

#jaispi -p Base.bin /dev/spidev0.0

JaiSpi v1.0

ID: 0xC22019 MX25L25635

Starting ...

0x02000000 -> 8192 written Sectors

Done!

 

Check: -v: Compares the flash content to file (It takes around 35seg)

 

#jaispi -v Base.bin /dev/spidev0.0

JaiSpi v1.0

ID: 0xC22019 MX25L25635

Checking ...

0x02000000 -> 0 Different sectors

Done!