Simple 360 NAND Flasher v1.2 by Swizzy
http://www.youtube.com/watch?v=inA8iNx15vg
- Added: Full support for Corona v2 (4GB Corona)
- Added: Auto Detect which mode to run in (it'll autodetect if you are running on a MMC type of machine or a RAW type [MMC type=Corona 4GB/V2, RAW=any other older machine])
- Added: Safe-Flash (Read to recovery.bin then write)
- Added: Autoshutdown after flash (it'll tell you it's shutting down then count down starting at 5 seconds...)
- Added: It'll turn off your wireless controllers during flash to keep you safe (if you reconnect them they'll be shut off again while it's working)
- Fixed: If you accidently hit eject the app now stays running!
- Fixed: You no longer see the options to write if you don't have a updflash.bin next to the app...
- Fixed: Lot's of code cleanup, making it look nicer and easier to follow/understand
- Added: It'll now also check for Spare data before writing, again it's a safety measure, if it finds spare data while in MMC mode it'll warn you about it and give you the option to exit... and of course the other way around for raw mode...
- Added: The above check for spare also checks for the "Magic bytes" (your Xbox 360 image should start with 0xFF4F, i've never seen an image that differ from this, and thus it's an easy way for me to check that the file you give the app really is a nand...)
- Fixed: The app will now clear the line of output before it starts overwriting, this means that you'll no longer see leftover output on screen from previous output(mostly for error messages during progress output)
- Changed: The app now use a different font (it used Arial before, now it uses verdana)
** WARNING!! If you don't let the app exit after flashing a corona v2 you will most likely end up with a machine that no longer boots untill you reflash it using a computer!! You've been warned... **
** Altought this version adds multipile security checks before it starts writing an image to your nand it can still be very dangerous... if you don't know what you are doing, don't do it! **
Impec, super boulot, effectivement du coup on ne devrait plus avoir besoin de laisser les modules de dump sur corona V2 ce qui est plutôt cool. Un grand merci
To see the program used rawflash 4g so we will be entitled to one. Elf also like that even if the console does not boot but that one has access to xell not need USB module. Good new stuff.
Non si tu n as pas ta clef cpu avec un dump entérrieur a ton 15574 mais bon tu es pas dans la bonne section pour ça.
Thank you for the precision Swizzy.
"I have no plans at this time to build a elf that will flash your v2 using xell... maybe cOz or someone else makes one once there is video output for xell on corona... untill we have video output in xell on coronas an elf is pretty useless because you have no idea how far along it has come..."
Moi ça fonctionne avec mon glitch360spi 3.0, avec l'outil gsu j'ai une fenetre ou le xell se lance à coté justement puisque sur corona on a pas le xell sur la télévision
Bon après 2 test sur un GGboot 15574 j'ai pas obtenus ce qui était prévu oO
Dump (X ) OK
Write ( A ) updflash.bin (15574) bloqué a 6.25%
Dump + Write ( B ) Recovery.bin ok, Write updflash.bin (15574) pas de progression rien
Apres chaque test la console boot normalement
Je vais tester avec un autre Dash (14719) pour voir si elle prend bien en compte le flash
There is no TV output on coronas ... if you connect it to monitor and UART that ... it's fine, goal MOST ppl do not know how to do this ... etheir way it does not matter much to me to Have a elf ... maybe coz rawflash updates to v2 aussi media's ... i do not know ...
I followed this tutorial: http://glitch360key....nload.php?id=28
her gives her:
